简介

Make it easier to zip up your favorite jacket by replacing a missing zipper pull tab. It only takes a few minutes and afterward you’ll be able to grib your zipper pull with mittens or gloves.

For replacement parts or further assistance, contact Patagonia Customer Service.

视频概述

Zipper pull replacement overview.

Get your new zipper pull and position it with the pull-tab down. Lift up the zipper, as if you were pulling the zipper closed.
  • Get your new zipper pull and position it with the pull-tab down.

  • Lift up the zipper, as if you were pulling the zipper closed.

添加评论

Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally. Pull the zipper pull through the smaller hole. Pull the zipper pull through the smaller hole.
  • Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.

  • Pull the zipper pull through the smaller hole.

添加评论

Rest the zipper back in its normal, hanging position. Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.
  • Rest the zipper back in its normal, hanging position.

  • Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

添加评论

Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper. Bring the zipper pull-tab through the loop.
  • Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.

  • Bring the zipper pull-tab through the loop.

添加评论

Pull the zipper pull-tab snug. The zipper pull should now be inserted and lay flat.
  • Pull the zipper pull-tab snug.

  • The zipper pull should now be inserted and lay flat.

添加评论

终点

2等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

78,597 信誉积分

创作了433篇指南

团队

iFixit iFixit 的会员

Community

113 名成员

创作了6,002篇指南

添加评论

浏览统计数据:

过去的24小时: 13

过去的7天: 63

过去的30天: 233

总计 9,729